LETTERS & MARBLES — SMALL — 36 characters

Use a 16 mm marble. All files use 0.2 mm per font unit.
Import at 100%, flat base down and open channel up. Do not resize in the slicer.
One character per plate; XY rotations are already included for bed fit.
Small targets a 180 mm bed with 5 mm margin. Large targets a 256 mm bed.
The slicer controls internal infill. Inspect your slice and try one print first.
These are digitally screened, experimental designs; new characters are unprinted.
Bambu importer acceptance is not a slice or a physical trial.

f: 2 separate runs; lift and reset the marble between strokes.
i: 2 separate runs; lift and reset the marble between strokes.
j: 2 separate runs; lift and reset the marble between strokes.
t: 2 separate runs; lift and reset the marble between strokes.
x: 2 separate runs; lift and reset the marble between strokes.
4: 2 separate runs; lift and reset the marble between strokes.
5: Place the marble in the lower cup under the raised bar for stroke 1. Lift to the top bar for stroke 2.
